Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method

Fin Ray-inspired soft grippers offer a promising solution for gently handling delicate, irregular objects, especially in agriculture. The objective of this research is to design, fabricate, and model a Fin Ray Effect (FRE) soft gripper finger to enable precise force control in future applications. This design aims to gently grasp delicate agricultural products, such as tomatoes, that require both adaptability and accurate force application. To address the inherent challenges of soft robotics, including nonlinear behavior, infinite degrees of freedom, and variable material properties, the Finite Rigid Elements Method (FREM) was employed for modeling. This method preserves analytical accuracy while providing a reliable foundation for the development of a force controller in later stages. A detailed Finite Element Model (FEM) was created using ANSYS, and the analytical results were validated through simulation and experimental testing. The gripper's fingers were optimized based on four key criteria: tip displacement, total deflection, stress distribution, and contact force. The optimal finger configuration includes a length of 30 mm, rib spacing of 10 mm, seven ribs angled at -15 deg, and a rib thickness of 1 mm. Theoretical modeling using the FREM predicted finger deformation with a 3% error, while the ANSYS numerical model achieved 2% error.

Source: arXiv:2606.03798v1 - http://arxiv.org/abs/2606.03798v1 PDF: https://arxiv.org/pdf/2606.03798v1 Original Link: http://arxiv.org/abs/2606.03798v1